Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Built for the wall outside.
A traditional four-sided wall lantern in die cast aluminium alloy with a matte black powder-coat finish. The body is denser and more rigid than pressed metal, which means the edges stay sharp and the frame holds its shape through years of thermal cycling and rain. Clear glass panels on all sides let the bulb show through, giving the lantern warmth when lit and a clean silhouette in daylight. At 200mm wide, 200mm from the wall and 410mm tall, it has enough presence to anchor a front door without overwhelming the wall around it. IP44 rated. Fully dimmable with an E27 bulb up to 60W.
Six reasons this lantern lasts.
- Die cast aluminium alloy body: Injected under high pressure into a steel mould, producing a body that holds fine detail and resists warping. Fundamentally different from stamped sheet metal that loosens at the joints within a few seasons.
- Matte black powder-coat finish: Baked onto the aluminium surface for resistance to UV fade, rain spotting and surface corrosion. The matte texture absorbs light rather than reflecting it, giving the fitting a quiet, understated presence on the wall.
- Clear glass panels, all four sides: Transparent glass, not tinted or frosted. The bulb is visible from every angle when lit, and the lantern holds its traditional shape in daylight as a clean silhouette against the wall surface.
- IP44 rated for outdoor exposure: Protected against water splashes from any direction. Handles wind-driven rain, porch drip and general UK exterior wall conditions across all four seasons without additional weatherproofing.
- Standard E27 bulb, fully dimmable: Takes a widely available E27 GLS lamp up to 60W. Pair with a dimmable LED and an outdoor-rated dimmer switch for adjustable light levels at the entrance.
- 410mm tall, substantial but not bulky: Large enough to register as an architectural feature beside a front door or on a garden wall. The 200mm depth keeps it close to the wall surface without protruding into a walkway.
Positions that suit it best.
Beside a front door on red brick where the matte black draws a clean frame and the clear glass catches the warmth of the masonry. On a rendered white wall where the lantern becomes the focal point of the facade. Flanking a garden gate on honey stone or alongside a porch where the traditional silhouette adds character. For how exterior and interior design choices work together, our guide to home decor trends for 2025 covers how outdoor materials and finishes carry through into the hallway.
Visible every hour, in all weathers.
An outdoor wall light does not get evenings off. It sits on the front of your house in morning frost, afternoon sun, driving rain and everything in between. The fitting you choose for that position is not just a light source; it is an architectural detail that says something about the property behind it, around the clock.
This traditional wall lantern is die cast in aluminium alloy with a matte black powder-coat finish. Die casting produces a denser, more rigid body than pressed or stamped metal, which means the edges stay sharp and the frame resists warping over years of thermal cycling. The clear glass panels let you see the bulb inside, and the traditional four-sided lantern silhouette gives the fitting an established, period-appropriate character that works on Victorian terraces, Edwardian semis and new-build brick alike. Dimensions are generous: 200mm wide, 200mm from the wall and 410mm tall.
IP44 rated and fully dimmable with an E27 bulb, it handles rain from any direction and gives you control over the light level at the door. For ideas on how black metalwork and industrial materials work in domestic interiors, our guide to industrial living room design covers how the same matte black finish translates from exterior to interior.
What die cast aluminium actually means.
- Die cast, not pressed or stamped. Molten aluminium alloy is injected into a steel mould under high pressure, producing a body that is denser, more rigid and more dimensionally consistent than sheet-formed alternatives. Edges stay crisp. Joints stay tight.
- Matte black powder-coat finish. The coating is baked onto the aluminium body, creating a surface that resists UV fade, rain spotting and the kind of surface degradation that leaves cheaper fittings looking tired within a couple of seasons.
- Clear glass panels on all four sides. The glass is transparent, not tinted or frosted. A decorative filament E27 bulb becomes visible through every panel, giving the lantern character when lit and a traditional silhouette when off.
- IP44 rated for outdoor use. Protected against water splashes from any direction. Suitable for exposed wall positions beside front doors, porches, driveways and garden walls without additional weatherproofing.
- Dimmable with E27 bulb. Takes a standard E27 GLS lamp up to 60W. Pair with a dimmable LED and outdoor-rated dimmer for full control over the light level at the entrance.
- Class 1, requires earth connection. The fitting connects to an earthed mains supply at 220-240V. Hardwired installation to an existing outdoor light point.
Why IP44 matters at your door.
IP44 means the fitting is protected against solid objects larger than 1mm and against water splashes from any direction. In practice, that covers wind-driven rain hitting the wall at an angle, water running down from a porch roof and the general exposure of a UK exterior wall across all four seasons. It does not cover submersion or direct jet washing, but for a wall-mounted lantern beside a front door, on a porch wall or flanking a garage, IP44 is the rating that matches the real conditions the fitting will face.
Where matte black earns its place.
Against red brick where the black frame draws a clean line and the clear glass catches the warmth of the masonry. On rendered white walls where the lantern becomes the strongest visual element on the facade. Beside a painted front door in heritage green, navy or burgundy where the matte black sits as a neutral anchor. Flanking a driveway gate on honey-coloured stone where the traditional silhouette adds period detail without looking ornate. On a garden wall at the side of the house where the 410mm height is substantial enough to light a path without the bulk of a post lantern.
Before you order.
- Bulb not included. Takes a standard E27 GLS lamp up to 60W. LED recommended for efficiency and longevity in an outdoor position where bulb changes are less convenient.
- Class 1, outdoor hardwired installation. Requires an earthed mains supply. The fitting connects to an existing outdoor wall light point at 220-240V. A qualified professional should carry out the wiring.
- Check your wall position and fixings. At 410mm tall and 200mm wide, the lantern needs a clear wall section. Suitable for brick, masonry and rendered surfaces. Ensure fixings are appropriate for the wall type and that the position is accessible for future bulb replacement.
Delivery
| Service | Timescale | Cost |
|---|---|---|
| Standard | 3-5 working days | Free |
| Next working day | Order before 4pm | £5.95 |
UK mainland only. Orders placed on weekends or bank holidays are dispatched the next working day.
We are unable to deliver to Northern Ireland, the Scottish Isles, Jersey, Guernsey, the Isle of Wight, the Isle of Man, or the Isles of Scilly. Full delivery information.
Returns
28-day returns policy. Contact us within 28 days of receipt if you are not happy with your order.
Items must be returned unused and in their original packaging. Our UK-based team will guide you through the process. Full returns information.
FAQs: Traditional Black Outdoor Wall Lantern
Die casting injects molten aluminium alloy into a steel mould under high pressure, producing a body that is denser and more stable than pressed or stamped sheet metal. The result is sharper edges, tighter joints and better resistance to warping through years of thermal cycling. It also takes a powder-coat finish more evenly, improving long-term weather resistance.
Plastic lanterns are lighter and cheaper but degrade under UV exposure, becoming brittle and faded within a few years. Die cast aluminium holds its shape and finish far longer. The weight difference is noticeable; this lantern feels solid on the wall in a way that plastic cannot replicate.
A standard E27 GLS lamp up to 60W. An LED equivalent is recommended for outdoor positions where bulb changes are less convenient. A warm white LED (2700K) gives a traditional amber glow through the clear glass panels. A filament-style E27 LED adds visible character inside the lantern.
Front doors, porches, driveways, garden walls and side passages. The matte black finish works on red brick, rendered white, honey stone and painted masonry. The traditional silhouette suits Victorian terraces, Edwardian semis and new builds alike. For how exterior choices carry through to interiors, the Industrial Brass Desk Lamp shows how metallic finishes bridge the transition from porch to hallway.
Yes. You need a dimmable E27 LED bulb and an outdoor-rated dimmer switch. With both in place, the lantern adjusts from full brightness down to a low overnight glow.
IP44 means protection against solid objects larger than 1mm and water splashes from any direction. In practice this covers wind-driven rain, water running off a porch roof and general UK exterior wall exposure. It does not cover submersion or direct jet washing.
Class 1 means the fitting requires an earth connection. The supply cable must include live, neutral and earth wires. For outdoor installation, the cable and connections must be suitably rated for exterior use.
Yes, and a pair is the most traditional arrangement. At 200mm wide, two lanterns sit comfortably either side of a standard UK front door with balanced spacing. Each fitting requires its own wired outdoor light point. Matching the height on both sides is important for a symmetrical result.
200mm wide, 200mm projection, 410mm tall. Die cast aluminium alloy body with matte black powder-coat finish. Clear glass panels on four sides. E27 GLS bulb up to 60W (not included). Dimmable. 220-240V, Class 1, IP44. Weight 1.35 kg. Hardwired, wall-mounted outdoor fitting.
Make Your Entrance Work Harder
The lantern outside sets the first impression, but the hallway behind the door finishes the story. Getting the lighting, materials and layout right on both sides of the threshold is what turns an entrance into something that feels considered. These guides cover how to make the interior spaces beyond your front door live up to the welcome outside.
Overview
Built for the wall outside.
A traditional four-sided wall lantern in die cast aluminium alloy with a matte black powder-coat finish. The body is denser and more rigid than pressed metal, which means the edges stay sharp and the frame holds its shape through years of thermal cycling and rain. Clear glass panels on all sides let the bulb show through, giving the lantern warmth when lit and a clean silhouette in daylight. At 200mm wide, 200mm from the wall and 410mm tall, it has enough presence to anchor a front door without overwhelming the wall around it. IP44 rated. Fully dimmable with an E27 bulb up to 60W.
Six reasons this lantern lasts.
- Die cast aluminium alloy body: Injected under high pressure into a steel mould, producing a body that holds fine detail and resists warping. Fundamentally different from stamped sheet metal that loosens at the joints within a few seasons.
- Matte black powder-coat finish: Baked onto the aluminium surface for resistance to UV fade, rain spotting and surface corrosion. The matte texture absorbs light rather than reflecting it, giving the fitting a quiet, understated presence on the wall.
- Clear glass panels, all four sides: Transparent glass, not tinted or frosted. The bulb is visible from every angle when lit, and the lantern holds its traditional shape in daylight as a clean silhouette against the wall surface.
- IP44 rated for outdoor exposure: Protected against water splashes from any direction. Handles wind-driven rain, porch drip and general UK exterior wall conditions across all four seasons without additional weatherproofing.
- Standard E27 bulb, fully dimmable: Takes a widely available E27 GLS lamp up to 60W. Pair with a dimmable LED and an outdoor-rated dimmer switch for adjustable light levels at the entrance.
- 410mm tall, substantial but not bulky: Large enough to register as an architectural feature beside a front door or on a garden wall. The 200mm depth keeps it close to the wall surface without protruding into a walkway.
Positions that suit it best.
Beside a front door on red brick where the matte black draws a clean frame and the clear glass catches the warmth of the masonry. On a rendered white wall where the lantern becomes the focal point of the facade. Flanking a garden gate on honey stone or alongside a porch where the traditional silhouette adds character. For how exterior and interior design choices work together, our guide to home decor trends for 2025 covers how outdoor materials and finishes carry through into the hallway.
Description
Visible every hour, in all weathers.
An outdoor wall light does not get evenings off. It sits on the front of your house in morning frost, afternoon sun, driving rain and everything in between. The fitting you choose for that position is not just a light source; it is an architectural detail that says something about the property behind it, around the clock.
This traditional wall lantern is die cast in aluminium alloy with a matte black powder-coat finish. Die casting produces a denser, more rigid body than pressed or stamped metal, which means the edges stay sharp and the frame resists warping over years of thermal cycling. The clear glass panels let you see the bulb inside, and the traditional four-sided lantern silhouette gives the fitting an established, period-appropriate character that works on Victorian terraces, Edwardian semis and new-build brick alike. Dimensions are generous: 200mm wide, 200mm from the wall and 410mm tall.
IP44 rated and fully dimmable with an E27 bulb, it handles rain from any direction and gives you control over the light level at the door. For ideas on how black metalwork and industrial materials work in domestic interiors, our guide to industrial living room design covers how the same matte black finish translates from exterior to interior.
What die cast aluminium actually means.
- Die cast, not pressed or stamped. Molten aluminium alloy is injected into a steel mould under high pressure, producing a body that is denser, more rigid and more dimensionally consistent than sheet-formed alternatives. Edges stay crisp. Joints stay tight.
- Matte black powder-coat finish. The coating is baked onto the aluminium body, creating a surface that resists UV fade, rain spotting and the kind of surface degradation that leaves cheaper fittings looking tired within a couple of seasons.
- Clear glass panels on all four sides. The glass is transparent, not tinted or frosted. A decorative filament E27 bulb becomes visible through every panel, giving the lantern character when lit and a traditional silhouette when off.
- IP44 rated for outdoor use. Protected against water splashes from any direction. Suitable for exposed wall positions beside front doors, porches, driveways and garden walls without additional weatherproofing.
- Dimmable with E27 bulb. Takes a standard E27 GLS lamp up to 60W. Pair with a dimmable LED and outdoor-rated dimmer for full control over the light level at the entrance.
- Class 1, requires earth connection. The fitting connects to an earthed mains supply at 220-240V. Hardwired installation to an existing outdoor light point.
Why IP44 matters at your door.
IP44 means the fitting is protected against solid objects larger than 1mm and against water splashes from any direction. In practice, that covers wind-driven rain hitting the wall at an angle, water running down from a porch roof and the general exposure of a UK exterior wall across all four seasons. It does not cover submersion or direct jet washing, but for a wall-mounted lantern beside a front door, on a porch wall or flanking a garage, IP44 is the rating that matches the real conditions the fitting will face.
Where matte black earns its place.
Against red brick where the black frame draws a clean line and the clear glass catches the warmth of the masonry. On rendered white walls where the lantern becomes the strongest visual element on the facade. Beside a painted front door in heritage green, navy or burgundy where the matte black sits as a neutral anchor. Flanking a driveway gate on honey-coloured stone where the traditional silhouette adds period detail without looking ornate. On a garden wall at the side of the house where the 410mm height is substantial enough to light a path without the bulk of a post lantern.
Before you order.
- Bulb not included. Takes a standard E27 GLS lamp up to 60W. LED recommended for efficiency and longevity in an outdoor position where bulb changes are less convenient.
- Class 1, outdoor hardwired installation. Requires an earthed mains supply. The fitting connects to an existing outdoor wall light point at 220-240V. A qualified professional should carry out the wiring.
- Check your wall position and fixings. At 410mm tall and 200mm wide, the lantern needs a clear wall section. Suitable for brick, masonry and rendered surfaces. Ensure fixings are appropriate for the wall type and that the position is accessible for future bulb replacement.
Specifications
Delivery & Returns
Delivery
| Service | Timescale | Cost |
|---|---|---|
| Standard | 3-5 working days | Free |
| Next working day | Order before 4pm | £5.95 |
UK mainland only. Orders placed on weekends or bank holidays are dispatched the next working day.
We are unable to deliver to Northern Ireland, the Scottish Isles, Jersey, Guernsey, the Isle of Wight, the Isle of Man, or the Isles of Scilly. Full delivery information.
Returns
28-day returns policy. Contact us within 28 days of receipt if you are not happy with your order.
Items must be returned unused and in their original packaging. Our UK-based team will guide you through the process. Full returns information.
FAQs
FAQs: Traditional Black Outdoor Wall Lantern
Die casting injects molten aluminium alloy into a steel mould under high pressure, producing a body that is denser and more stable than pressed or stamped sheet metal. The result is sharper edges, tighter joints and better resistance to warping through years of thermal cycling. It also takes a powder-coat finish more evenly, improving long-term weather resistance.
Plastic lanterns are lighter and cheaper but degrade under UV exposure, becoming brittle and faded within a few years. Die cast aluminium holds its shape and finish far longer. The weight difference is noticeable; this lantern feels solid on the wall in a way that plastic cannot replicate.
A standard E27 GLS lamp up to 60W. An LED equivalent is recommended for outdoor positions where bulb changes are less convenient. A warm white LED (2700K) gives a traditional amber glow through the clear glass panels. A filament-style E27 LED adds visible character inside the lantern.
Front doors, porches, driveways, garden walls and side passages. The matte black finish works on red brick, rendered white, honey stone and painted masonry. The traditional silhouette suits Victorian terraces, Edwardian semis and new builds alike. For how exterior choices carry through to interiors, the Industrial Brass Desk Lamp shows how metallic finishes bridge the transition from porch to hallway.
Yes. You need a dimmable E27 LED bulb and an outdoor-rated dimmer switch. With both in place, the lantern adjusts from full brightness down to a low overnight glow.
IP44 means protection against solid objects larger than 1mm and water splashes from any direction. In practice this covers wind-driven rain, water running off a porch roof and general UK exterior wall exposure. It does not cover submersion or direct jet washing.
Class 1 means the fitting requires an earth connection. The supply cable must include live, neutral and earth wires. For outdoor installation, the cable and connections must be suitably rated for exterior use.
Yes, and a pair is the most traditional arrangement. At 200mm wide, two lanterns sit comfortably either side of a standard UK front door with balanced spacing. Each fitting requires its own wired outdoor light point. Matching the height on both sides is important for a symmetrical result.
200mm wide, 200mm projection, 410mm tall. Die cast aluminium alloy body with matte black powder-coat finish. Clear glass panels on four sides. E27 GLS bulb up to 60W (not included). Dimmable. 220-240V, Class 1, IP44. Weight 1.35 kg. Hardwired, wall-mounted outdoor fitting.
Knowledge Hub
Make Your Entrance Work Harder
The lantern outside sets the first impression, but the hallway behind the door finishes the story. Getting the lighting, materials and layout right on both sides of the threshold is what turns an entrance into something that feels considered. These guides cover how to make the interior spaces beyond your front door live up to the welcome outside.
Traditional Black Outdoor Wall Lantern Light
Overview
Description
Specifications
Delivery & Returns
FAQs
Knowledge Hub
Built for the wall outside.
A traditional four-sided wall lantern in die cast aluminium alloy with a matte black powder-coat finish. The body is denser and more rigid than pressed metal, which means the edges stay sharp and the frame holds its shape through years of thermal cycling and rain. Clear glass panels on all sides let the bulb show through, giving the lantern warmth when lit and a clean silhouette in daylight. At 200mm wide, 200mm from the wall and 410mm tall, it has enough presence to anchor a front door without overwhelming the wall around it. IP44 rated. Fully dimmable with an E27 bulb up to 60W.
Six reasons this lantern lasts.
- Die cast aluminium alloy body: Injected under high pressure into a steel mould, producing a body that holds fine detail and resists warping. Fundamentally different from stamped sheet metal that loosens at the joints within a few seasons.
- Matte black powder-coat finish: Baked onto the aluminium surface for resistance to UV fade, rain spotting and surface corrosion. The matte texture absorbs light rather than reflecting it, giving the fitting a quiet, understated presence on the wall.
- Clear glass panels, all four sides: Transparent glass, not tinted or frosted. The bulb is visible from every angle when lit, and the lantern holds its traditional shape in daylight as a clean silhouette against the wall surface.
- IP44 rated for outdoor exposure: Protected against water splashes from any direction. Handles wind-driven rain, porch drip and general UK exterior wall conditions across all four seasons without additional weatherproofing.
- Standard E27 bulb, fully dimmable: Takes a widely available E27 GLS lamp up to 60W. Pair with a dimmable LED and an outdoor-rated dimmer switch for adjustable light levels at the entrance.
- 410mm tall, substantial but not bulky: Large enough to register as an architectural feature beside a front door or on a garden wall. The 200mm depth keeps it close to the wall surface without protruding into a walkway.
Positions that suit it best.
Beside a front door on red brick where the matte black draws a clean frame and the clear glass catches the warmth of the masonry. On a rendered white wall where the lantern becomes the focal point of the facade. Flanking a garden gate on honey stone or alongside a porch where the traditional silhouette adds character. For how exterior and interior design choices work together, our guide to home decor trends for 2025 covers how outdoor materials and finishes carry through into the hallway.
Visible every hour, in all weathers.
An outdoor wall light does not get evenings off. It sits on the front of your house in morning frost, afternoon sun, driving rain and everything in between. The fitting you choose for that position is not just a light source; it is an architectural detail that says something about the property behind it, around the clock.
This traditional wall lantern is die cast in aluminium alloy with a matte black powder-coat finish. Die casting produces a denser, more rigid body than pressed or stamped metal, which means the edges stay sharp and the frame resists warping over years of thermal cycling. The clear glass panels let you see the bulb inside, and the traditional four-sided lantern silhouette gives the fitting an established, period-appropriate character that works on Victorian terraces, Edwardian semis and new-build brick alike. Dimensions are generous: 200mm wide, 200mm from the wall and 410mm tall.
IP44 rated and fully dimmable with an E27 bulb, it handles rain from any direction and gives you control over the light level at the door. For ideas on how black metalwork and industrial materials work in domestic interiors, our guide to industrial living room design covers how the same matte black finish translates from exterior to interior.
What die cast aluminium actually means.
- Die cast, not pressed or stamped. Molten aluminium alloy is injected into a steel mould under high pressure, producing a body that is denser, more rigid and more dimensionally consistent than sheet-formed alternatives. Edges stay crisp. Joints stay tight.
- Matte black powder-coat finish. The coating is baked onto the aluminium body, creating a surface that resists UV fade, rain spotting and the kind of surface degradation that leaves cheaper fittings looking tired within a couple of seasons.
- Clear glass panels on all four sides. The glass is transparent, not tinted or frosted. A decorative filament E27 bulb becomes visible through every panel, giving the lantern character when lit and a traditional silhouette when off.
- IP44 rated for outdoor use. Protected against water splashes from any direction. Suitable for exposed wall positions beside front doors, porches, driveways and garden walls without additional weatherproofing.
- Dimmable with E27 bulb. Takes a standard E27 GLS lamp up to 60W. Pair with a dimmable LED and outdoor-rated dimmer for full control over the light level at the entrance.
- Class 1, requires earth connection. The fitting connects to an earthed mains supply at 220-240V. Hardwired installation to an existing outdoor light point.
Why IP44 matters at your door.
IP44 means the fitting is protected against solid objects larger than 1mm and against water splashes from any direction. In practice, that covers wind-driven rain hitting the wall at an angle, water running down from a porch roof and the general exposure of a UK exterior wall across all four seasons. It does not cover submersion or direct jet washing, but for a wall-mounted lantern beside a front door, on a porch wall or flanking a garage, IP44 is the rating that matches the real conditions the fitting will face.
Where matte black earns its place.
Against red brick where the black frame draws a clean line and the clear glass catches the warmth of the masonry. On rendered white walls where the lantern becomes the strongest visual element on the facade. Beside a painted front door in heritage green, navy or burgundy where the matte black sits as a neutral anchor. Flanking a driveway gate on honey-coloured stone where the traditional silhouette adds period detail without looking ornate. On a garden wall at the side of the house where the 410mm height is substantial enough to light a path without the bulk of a post lantern.
Before you order.
- Bulb not included. Takes a standard E27 GLS lamp up to 60W. LED recommended for efficiency and longevity in an outdoor position where bulb changes are less convenient.
- Class 1, outdoor hardwired installation. Requires an earthed mains supply. The fitting connects to an existing outdoor wall light point at 220-240V. A qualified professional should carry out the wiring.
- Check your wall position and fixings. At 410mm tall and 200mm wide, the lantern needs a clear wall section. Suitable for brick, masonry and rendered surfaces. Ensure fixings are appropriate for the wall type and that the position is accessible for future bulb replacement.
Delivery
| Service | Timescale | Cost |
|---|---|---|
| Standard | 3-5 working days | Free |
| Next working day | Order before 4pm | £5.95 |
UK mainland only. Orders placed on weekends or bank holidays are dispatched the next working day.
We are unable to deliver to Northern Ireland, the Scottish Isles, Jersey, Guernsey, the Isle of Wight, the Isle of Man, or the Isles of Scilly. Full delivery information.
Returns
28-day returns policy. Contact us within 28 days of receipt if you are not happy with your order.
Items must be returned unused and in their original packaging. Our UK-based team will guide you through the process. Full returns information.
FAQs: Traditional Black Outdoor Wall Lantern
Die casting injects molten aluminium alloy into a steel mould under high pressure, producing a body that is denser and more stable than pressed or stamped sheet metal. The result is sharper edges, tighter joints and better resistance to warping through years of thermal cycling. It also takes a powder-coat finish more evenly, improving long-term weather resistance.
Plastic lanterns are lighter and cheaper but degrade under UV exposure, becoming brittle and faded within a few years. Die cast aluminium holds its shape and finish far longer. The weight difference is noticeable; this lantern feels solid on the wall in a way that plastic cannot replicate.
A standard E27 GLS lamp up to 60W. An LED equivalent is recommended for outdoor positions where bulb changes are less convenient. A warm white LED (2700K) gives a traditional amber glow through the clear glass panels. A filament-style E27 LED adds visible character inside the lantern.
Front doors, porches, driveways, garden walls and side passages. The matte black finish works on red brick, rendered white, honey stone and painted masonry. The traditional silhouette suits Victorian terraces, Edwardian semis and new builds alike. For how exterior choices carry through to interiors, the Industrial Brass Desk Lamp shows how metallic finishes bridge the transition from porch to hallway.
Yes. You need a dimmable E27 LED bulb and an outdoor-rated dimmer switch. With both in place, the lantern adjusts from full brightness down to a low overnight glow.
IP44 means protection against solid objects larger than 1mm and water splashes from any direction. In practice this covers wind-driven rain, water running off a porch roof and general UK exterior wall exposure. It does not cover submersion or direct jet washing.
Class 1 means the fitting requires an earth connection. The supply cable must include live, neutral and earth wires. For outdoor installation, the cable and connections must be suitably rated for exterior use.
Yes, and a pair is the most traditional arrangement. At 200mm wide, two lanterns sit comfortably either side of a standard UK front door with balanced spacing. Each fitting requires its own wired outdoor light point. Matching the height on both sides is important for a symmetrical result.
200mm wide, 200mm projection, 410mm tall. Die cast aluminium alloy body with matte black powder-coat finish. Clear glass panels on four sides. E27 GLS bulb up to 60W (not included). Dimmable. 220-240V, Class 1, IP44. Weight 1.35 kg. Hardwired, wall-mounted outdoor fitting.
Make Your Entrance Work Harder
The lantern outside sets the first impression, but the hallway behind the door finishes the story. Getting the lighting, materials and layout right on both sides of the threshold is what turns an entrance into something that feels considered. These guides cover how to make the interior spaces beyond your front door live up to the welcome outside.
Overview
Built for the wall outside.
A traditional four-sided wall lantern in die cast aluminium alloy with a matte black powder-coat finish. The body is denser and more rigid than pressed metal, which means the edges stay sharp and the frame holds its shape through years of thermal cycling and rain. Clear glass panels on all sides let the bulb show through, giving the lantern warmth when lit and a clean silhouette in daylight. At 200mm wide, 200mm from the wall and 410mm tall, it has enough presence to anchor a front door without overwhelming the wall around it. IP44 rated. Fully dimmable with an E27 bulb up to 60W.
Six reasons this lantern lasts.
- Die cast aluminium alloy body: Injected under high pressure into a steel mould, producing a body that holds fine detail and resists warping. Fundamentally different from stamped sheet metal that loosens at the joints within a few seasons.
- Matte black powder-coat finish: Baked onto the aluminium surface for resistance to UV fade, rain spotting and surface corrosion. The matte texture absorbs light rather than reflecting it, giving the fitting a quiet, understated presence on the wall.
- Clear glass panels, all four sides: Transparent glass, not tinted or frosted. The bulb is visible from every angle when lit, and the lantern holds its traditional shape in daylight as a clean silhouette against the wall surface.
- IP44 rated for outdoor exposure: Protected against water splashes from any direction. Handles wind-driven rain, porch drip and general UK exterior wall conditions across all four seasons without additional weatherproofing.
- Standard E27 bulb, fully dimmable: Takes a widely available E27 GLS lamp up to 60W. Pair with a dimmable LED and an outdoor-rated dimmer switch for adjustable light levels at the entrance.
- 410mm tall, substantial but not bulky: Large enough to register as an architectural feature beside a front door or on a garden wall. The 200mm depth keeps it close to the wall surface without protruding into a walkway.
Positions that suit it best.
Beside a front door on red brick where the matte black draws a clean frame and the clear glass catches the warmth of the masonry. On a rendered white wall where the lantern becomes the focal point of the facade. Flanking a garden gate on honey stone or alongside a porch where the traditional silhouette adds character. For how exterior and interior design choices work together, our guide to home decor trends for 2025 covers how outdoor materials and finishes carry through into the hallway.
Description
Visible every hour, in all weathers.
An outdoor wall light does not get evenings off. It sits on the front of your house in morning frost, afternoon sun, driving rain and everything in between. The fitting you choose for that position is not just a light source; it is an architectural detail that says something about the property behind it, around the clock.
This traditional wall lantern is die cast in aluminium alloy with a matte black powder-coat finish. Die casting produces a denser, more rigid body than pressed or stamped metal, which means the edges stay sharp and the frame resists warping over years of thermal cycling. The clear glass panels let you see the bulb inside, and the traditional four-sided lantern silhouette gives the fitting an established, period-appropriate character that works on Victorian terraces, Edwardian semis and new-build brick alike. Dimensions are generous: 200mm wide, 200mm from the wall and 410mm tall.
IP44 rated and fully dimmable with an E27 bulb, it handles rain from any direction and gives you control over the light level at the door. For ideas on how black metalwork and industrial materials work in domestic interiors, our guide to industrial living room design covers how the same matte black finish translates from exterior to interior.
What die cast aluminium actually means.
- Die cast, not pressed or stamped. Molten aluminium alloy is injected into a steel mould under high pressure, producing a body that is denser, more rigid and more dimensionally consistent than sheet-formed alternatives. Edges stay crisp. Joints stay tight.
- Matte black powder-coat finish. The coating is baked onto the aluminium body, creating a surface that resists UV fade, rain spotting and the kind of surface degradation that leaves cheaper fittings looking tired within a couple of seasons.
- Clear glass panels on all four sides. The glass is transparent, not tinted or frosted. A decorative filament E27 bulb becomes visible through every panel, giving the lantern character when lit and a traditional silhouette when off.
- IP44 rated for outdoor use. Protected against water splashes from any direction. Suitable for exposed wall positions beside front doors, porches, driveways and garden walls without additional weatherproofing.
- Dimmable with E27 bulb. Takes a standard E27 GLS lamp up to 60W. Pair with a dimmable LED and outdoor-rated dimmer for full control over the light level at the entrance.
- Class 1, requires earth connection. The fitting connects to an earthed mains supply at 220-240V. Hardwired installation to an existing outdoor light point.
Why IP44 matters at your door.
IP44 means the fitting is protected against solid objects larger than 1mm and against water splashes from any direction. In practice, that covers wind-driven rain hitting the wall at an angle, water running down from a porch roof and the general exposure of a UK exterior wall across all four seasons. It does not cover submersion or direct jet washing, but for a wall-mounted lantern beside a front door, on a porch wall or flanking a garage, IP44 is the rating that matches the real conditions the fitting will face.
Where matte black earns its place.
Against red brick where the black frame draws a clean line and the clear glass catches the warmth of the masonry. On rendered white walls where the lantern becomes the strongest visual element on the facade. Beside a painted front door in heritage green, navy or burgundy where the matte black sits as a neutral anchor. Flanking a driveway gate on honey-coloured stone where the traditional silhouette adds period detail without looking ornate. On a garden wall at the side of the house where the 410mm height is substantial enough to light a path without the bulk of a post lantern.
Before you order.
- Bulb not included. Takes a standard E27 GLS lamp up to 60W. LED recommended for efficiency and longevity in an outdoor position where bulb changes are less convenient.
- Class 1, outdoor hardwired installation. Requires an earthed mains supply. The fitting connects to an existing outdoor wall light point at 220-240V. A qualified professional should carry out the wiring.
- Check your wall position and fixings. At 410mm tall and 200mm wide, the lantern needs a clear wall section. Suitable for brick, masonry and rendered surfaces. Ensure fixings are appropriate for the wall type and that the position is accessible for future bulb replacement.
Specifications
Delivery & Returns
Delivery
| Service | Timescale | Cost |
|---|---|---|
| Standard | 3-5 working days | Free |
| Next working day | Order before 4pm | £5.95 |
UK mainland only. Orders placed on weekends or bank holidays are dispatched the next working day.
We are unable to deliver to Northern Ireland, the Scottish Isles, Jersey, Guernsey, the Isle of Wight, the Isle of Man, or the Isles of Scilly. Full delivery information.
Returns
28-day returns policy. Contact us within 28 days of receipt if you are not happy with your order.
Items must be returned unused and in their original packaging. Our UK-based team will guide you through the process. Full returns information.
FAQs
FAQs: Traditional Black Outdoor Wall Lantern
Die casting injects molten aluminium alloy into a steel mould under high pressure, producing a body that is denser and more stable than pressed or stamped sheet metal. The result is sharper edges, tighter joints and better resistance to warping through years of thermal cycling. It also takes a powder-coat finish more evenly, improving long-term weather resistance.
Plastic lanterns are lighter and cheaper but degrade under UV exposure, becoming brittle and faded within a few years. Die cast aluminium holds its shape and finish far longer. The weight difference is noticeable; this lantern feels solid on the wall in a way that plastic cannot replicate.
A standard E27 GLS lamp up to 60W. An LED equivalent is recommended for outdoor positions where bulb changes are less convenient. A warm white LED (2700K) gives a traditional amber glow through the clear glass panels. A filament-style E27 LED adds visible character inside the lantern.
Front doors, porches, driveways, garden walls and side passages. The matte black finish works on red brick, rendered white, honey stone and painted masonry. The traditional silhouette suits Victorian terraces, Edwardian semis and new builds alike. For how exterior choices carry through to interiors, the Industrial Brass Desk Lamp shows how metallic finishes bridge the transition from porch to hallway.
Yes. You need a dimmable E27 LED bulb and an outdoor-rated dimmer switch. With both in place, the lantern adjusts from full brightness down to a low overnight glow.
IP44 means protection against solid objects larger than 1mm and water splashes from any direction. In practice this covers wind-driven rain, water running off a porch roof and general UK exterior wall exposure. It does not cover submersion or direct jet washing.
Class 1 means the fitting requires an earth connection. The supply cable must include live, neutral and earth wires. For outdoor installation, the cable and connections must be suitably rated for exterior use.
Yes, and a pair is the most traditional arrangement. At 200mm wide, two lanterns sit comfortably either side of a standard UK front door with balanced spacing. Each fitting requires its own wired outdoor light point. Matching the height on both sides is important for a symmetrical result.
200mm wide, 200mm projection, 410mm tall. Die cast aluminium alloy body with matte black powder-coat finish. Clear glass panels on four sides. E27 GLS bulb up to 60W (not included). Dimmable. 220-240V, Class 1, IP44. Weight 1.35 kg. Hardwired, wall-mounted outdoor fitting.
Knowledge Hub
Make Your Entrance Work Harder
The lantern outside sets the first impression, but the hallway behind the door finishes the story. Getting the lighting, materials and layout right on both sides of the threshold is what turns an entrance into something that feels considered. These guides cover how to make the interior spaces beyond your front door live up to the welcome outside.
